Solutions in Weighing, Handling and Industrial Safety

946 713 222

Solutions in Weighing, Handling and Industrial Safety

Anemometer Wind-800

Author : Dinaksa - ENG

Data of the vane

  •  The vane has dimensions of 150mm in height and a turning diameter in the cups of approximately 130mm.
  • Inside it has a toothed wheel for use with an electronic photo-switch and in this way to achieve pulse trains, which after processing will indicate the wind speed.
  • The electronic control card must be powered by a 12Vdc source and the data is sent by possible means of communication: CANBus (standard mounting) or RS-485.
  • In addition, it has a heating element to increase the temperature inside, in the event that the ambient temperature is below 0º. This resistance reacts and acts.

Data of the control module

  • Supply voltage: 100-240VAc / 50Hz-60 Hz (Optional 48 Vac and 24 Vac / Vdc)
  • Speed 1 and speed 2 relay output (programmable)
    o Maximum effective voltage 250 Vef
    o Maximum effective current: 6th
     Note: These outputs must attack a resistive type load, or loads with little capacitive or inductive effect
  • Maximum wind speed: 200 Km / h
  • Resolution: 0.1 Km / h
  • Interface: 8-digit alphanumeric LCD display, 5 status indicator LEDs and 4 buttons for programming
  • Box dimensions: (scheme on the right

 

Anemómetro WIND-800 controla vientos hasta 120 km/h.
Ofrece 3 relés libres configurables por el propio cliente para maniobras de su grúa y 3 pulsadores de programación. Se coloca en grúas ubicadas al aire libre para evitar posibles accidentes laborales si el viento supera determinados límites.