Electronic Load Limiter LIM-E725

por Dinaksa - ENG | May 15, 2024

Electronic Load Limiter LIM-E725 has a programmable relay which allows it to operate as a maximum, instantaneous or timed load limit.

This consists of a cable cell or bolt and an electronic box.

It can be mounted on any cable diameter.

CARACTERÍSTICAS

• Compact design electronic load limiter
• Programmable in overload (mandatory according to European regulation 2006/42 / CE-4.2.2 Load control), load summation (mandatory according to regulation EN-15011), loose cable, trip delay, timer relay …
• Power supply 85-264Vac. 47-440Hz (Optional 24-48Vac, 50Hz)
• 3 programmable outputs with potential free switched relay (6 A / 250Vac.) And timer.
• 3 programming buttons (S1, S2, S3)
• LCD display with 5 digits of 5 mm
• 5 status indicators (On, stability, 1-2-3 limit trip)
• Sensor input in mV
• Communication with up to 9 devices via BUS rs-485
• Communication with outdoor displays and other DK Dinaksa control or visualization elements, warning lights, acoustic signals, etc.
• Inputs and outputs for multiple applications.
• DIN rail installation
• Measurements, Length x Width x Depth 90mm x 72mm x 70mm
• Working temperature -20ºC to + 60ºC

National manufacturing with accredited metrological control nº 01M042

Options

• Sensor input at 4-20mA
• Output 4-20mAm, 0..20mA, 0..5V, 0..10V for the control of the cranethrough PLC’s (Siemens, Omron).
• RS-232 output for connection with PROFIBUS DP module
• Communication with internal or external equipment via radio or Wifi
• Custom programming.

For implementation in:
Crane bridge, one cart, double cart, double hook,…
Elevators, hoists, lifting equipment, automation,…

Crane Black Box CIG-821

por Dinaksa - ENG | May 15, 2024

Crane Black Box CIG-821, crane registration and control system. Electronic equipment for collecting data from the sensors installed in the cranes.

DINAKSA’s CIG-821 Data logger is the new brain for overhead cranes and other lifting equipment in your company.

DINAKSA CIG-821 makes it possible to carry out intelligent and safe programming for revisions/preventive maintenance (by hour limits and/or number of activations and/or date).

CIG-821 identifies improper operations and alarms that could cause breakdowns in the crane and/or work accidents.

1.- Record the load spectrum of lifting equipment in accordance with the UNE 58144 and UNE 58919 standards.
2.- Calculate the PFS “Safe Operation Period”, in accordance with the FEM9755 standard and indicates in real time or cycle of hours of work consumed.
3.-Store all the maneuvers performed (time and number of actuations) CIG-821 registers alarms for overload, loose cable, cable inclination, temperature or sudden reversals.
4.- Offer visual indications through a touch screen display with a very intuitive interface for programming or data reset (with password).
5.- With 14 digital inputs and 4 analog inputs
6.- Includes 6 relay alarm outputs and 2 analog outputs, all programmable (Optional Output: CANopen or Profibus)
7.- Offer the recorded information/data to analyze at any time (data in Excel), just download it via WIFI.

More advantages:

• Memorizes the amounts/weights/loads and/or the total time of each movement or maneuver performed.
  Memorizing up to 4 different load control zones (25%, 50%, 75%, 100%).
• Equipment designed in accordance with EN ISO 13849-1:2015:Pld Category 3
• Data storage lifetime greater than 100 years.

CIG821 Black Box meets the following standards:

• UNE 58144-5:2015 Cranes. Inspections. Part 5: Bridge and Gantry Cranes
• UNE 58919:1995 Serial Hoist Units. Measures for achieving safe working periods for motorized serial hoist. (SWP)
• FEM 9.755 – Measures for achieving safe working periods for motorized serial hoist (SWP)