por Dinaksa - ENG | Oct 9, 2022
Collision Avoidance ANTC-100, safety system to avoid the collision of one or several cranes against objects, walls, shelves or between cranes of all kinds: bridge, gantry, semi-gantry, jib, etc. Avoid accidents at work and damage to goods, products and mainly to your workers during maneuvers with heavy loads and the use of cranes. Avoid damage to your cranes from crashes.
por Dinaksa - ENG | Oct 8, 2022
Data of the vane
- The vane has dimensions of 150mm in height and a turning diameter in the cups of approximately 130mm.
- Inside it has a toothed wheel for use with an electronic photo-switch and in this way to achieve pulse trains, which after processing will indicate the wind speed.
- The electronic control card must be powered by a 12Vdc source and the data is sent by possible means of communication: CANBus (standard mounting) or RS-485.
- In addition, it has a heating element to increase the temperature inside, in the event that the ambient temperature is below 0º. This resistance reacts and acts.
Data of the control module
- Supply voltage: 100-240VAc / 50Hz-60 Hz (Optional 48 Vac and 24 Vac / Vdc)
- Speed 1 and speed 2 relay output (programmable)
o Maximum effective voltage 250 Vef
o Maximum effective current: 6th
Note: These outputs must attack a resistive type load, or loads with little capacitive or inductive effect
- Maximum wind speed: 200 Km / h
- Resolution: 0.1 Km / h
- Interface: 8-digit alphanumeric LCD display, 5 status indicator LEDs and 4 buttons for programming
- Box dimensions: (scheme on the right
por Dinaksa - ENG | Oct 7, 2022
The limiters are specially designed to prevent and avoid overloads that can occur in lifting devices such as bridge cranes, cranes, hoists, elevators, etc. These devices allow savings in maintenance costs caused by cable breaks, hooks, wheels, rails, beam deformation, etc. Increases the safety of the company, avoiding accidents due to overload.
TECHNICAL FEATURE
- Compact design.
- Programmable in overload (compulsory according to European legislation 2006/42/CE-4.2.2 Load Control).
- Maximum rope capacity up to 9.500kg.
- Ø of the rope 5 mm up to 30 mm
- Made of high resistance tempered steel.
- Bichromate finish.
- Accuracy: +/- 1% on the maximum capacity.
- Working temperature -20˚C to +70˚C.
- IP67 protection.
- Anti-fall safety device.
- Snap action switches:
o 10A 125/250Vac
o -40ºC to +80ºC
- In accordance to ENG61058-1 (10.000cy)
- In accordance to UL1054 (6.000 cy)
National manufacturing with accredited metrological control nº 01M042
Options:
Fields of application
- Overhead cranes with a single trolley, double trolley,double hook…
- Lifts, hoists, lifting equipment, automatisms…
- Our Technical Office Department shall advise you about the most suitable solution that fits your requirements.
Contact us for your specific needs
National manufacturing with accredited metrological control nº 01M042
por Dinaksa - ENG | Oct 6, 2022
SUITABLE FOR EXPLOSIVE ATMOSPHERES II 2GD IIC T6 (T80ºC)
TECHNICAL FEATURES
The compact design LIM-214 ATEX mechanical load limiter controls the overload in lifting equipment located in explosive zones, zones 1 or 21 in dusty and / or gaseous environments that can cause explosion through their own potential sources ignition.
- Capacity per rope: up to 9,500 kg
- Cable diameter: up to 38 mm
- Accuracy: ± 1%
- Working temperature: -20ºC / + 80ºC
ATEX Zones:
- II 2GD IIC T6 (T80ºC)
- Exp. LOM 17.786-C
- Directive 2014/34EU ATEX
- Norm UNE-EN 13463-1 :2011
Characteristics of the Switch
- Nominal current from 10A to 250 VAC
- Max Voltage 10 A AC
- Electrical useful life (Max. Load) min 10,000 operations
- Working temperature: -40 ºC / 105ºC
- Degree of protection (internal switch): IP 67
Fields of application:
- Bridge Cranes with one trolley, double trolley, doublehook …
- Elevators, hoists, lifting equipment,automatisms ……
- Our technical office department will be in charge of advising you in the search for the most suitable solution based on your needs.
Ask us about your specific need
por Dinaksa - ENG | Oct 5, 2022
TECHNICAL FEATURES
Mechanical load limiter for cranes of any type, with fixing to the cable. Applicable to any type of crane, it is designed to prevent overloads in hoists, cranes or any cable lifting system.
Made of resistant steel with bichromate finish or stainless steel depending on the model.
- Wire diameter : Ø 5mm up to 44mm.
- Working Temperature: -10Cº to +60ºC
- Maximum rope capacity: up to 15.000 Kg.
- 150% overload resistance on the maximum capacity.
Calibration Certificate (on request).
