por DINAKSA ESP | Oct 7, 2022
The limiters are specially designed to prevent and avoid overloads that can occur in lifting devices such as bridge cranes, cranes, hoists, elevators, etc. These devices allow savings in maintenance costs caused by cable breaks, hooks, wheels, rails, beam deformation, etc. Increases the safety of the company, avoiding accidents due to overload.
TECHNICAL FEATURE
- Compact design.
- Programmable in overload (compulsory according to European legislation 2006/42/CE-4.2.2 Load Control).
- Maximum rope capacity up to 9.500kg.
- Ø of the rope 5 mm up to 30 mm
- Made of high resistance tempered steel.
- Bichromate finish.
- Accuracy: +/- 1% on the maximum capacity.
- Working temperature -20˚C to +70˚C.
- IP67 protection.
- Anti-fall safety device.
- Snap action switches:
o 10A 125/250Vac
o -40ºC to +80ºC
- In accordance to ENG61058-1 (10.000cy)
- In accordance to UL1054 (6.000 cy)
National manufacturing with accredited metrological control nº 01M042
Options:
Fields of application
- Overhead cranes with a single trolley, double trolley,double hook…
- Lifts, hoists, lifting equipment, automatisms…
- Our Technical Office Department shall advise you about the most suitable solution that fits your requirements.
Contact us for your specific needs
National manufacturing with accredited metrological control nº 01M042
por DINAKSA ESP | Oct 6, 2022
SUITABLE FOR EXPLOSIVE ATMOSPHERES II 2GD IIC T6 (T80ºC)
TECHNICAL FEATURES
The compact design LIM-214 ATEX mechanical load limiter controls the overload in lifting equipment located in explosive zones, zones 1 or 21 in dusty and / or gaseous environments that can cause explosion through their own potential sources ignition.
- Capacity per rope: up to 9,500 kg
- Cable diameter: up to 38 mm
- Accuracy: ± 1%
- Working temperature: -20ºC / + 80ºC
ATEX Zones:
- II 2GD IIC T6 (T80ºC)
- Exp. LOM 17.786-C
- Directive 2014/34EU ATEX
- Norm UNE-EN 13463-1 :2011
Characteristics of the Switch
- Nominal current from 10A to 250 VAC
- Max Voltage 10 A AC
- Electrical useful life (Max. Load) min 10,000 operations
- Working temperature: -40 ºC / 105ºC
- Degree of protection (internal switch): IP 67
Fields of application:
- Bridge Cranes with one trolley, double trolley, doublehook …
- Elevators, hoists, lifting equipment,automatisms ……
- Our technical office department will be in charge of advising you in the search for the most suitable solution based on your needs.
Ask us about your specific need
por DINAKSA ESP | Oct 5, 2022
TECHNICAL FEATURES
Mechanical load limiter for cranes of any type, with fixing to the cable. Applicable to any type of crane, it is designed to prevent overloads in hoists, cranes or any cable lifting system.
Made of resistant steel with bichromate finish or stainless steel depending on the model.
- Wire diameter : Ø 5mm up to 44mm.
- Working Temperature: -10Cº to +60ºC
- Maximum rope capacity: up to 15.000 Kg.
- 150% overload resistance on the maximum capacity.
Calibration Certificate (on request).
por DINAKSA ESP | Oct 4, 2022
OverLoad Limiting Cell ADK
Load limiting Cell ADK has a capacity from 1,000 to 10,000 kg. and maximum cable diameter 30 mm. It is indicated for the limitation of loads in overhead cranes, tower cranes, elevator lifts, freight elevators, etc.
por DINAKSA ESP | Oct 3, 2022
Overload Limiting Cell LmDK
TECHNICAL CHARACTERISTICS
- Load cells designed for the measurement of loads in steel cables.
- Made of high-strength nickel-plated steel.
- Maximum robustness.
- Capacity: 3,5 tons – to need.
- 5 to 15 Vdc power supply
- Sensitivity approx. 1.5 mV / V
- Zero tolerance setting 2% F.E.
- Load limit without losing characteristics 200% F.E.
- Breaking load> 300% F.E
- Protection: IP66
- Supplied with 5 meters of cable.
